第一论文网 参考文献 2020-05-19 17:29:23 141



  [1]Jayanthi Parthasarathy PhD,Ramkumar Krishnamurthy PhD,Adam Ostendorf MD,Toshiharu Shinoka MD, PhD,Rajesh Krishnamurthy MD. 3D printing with MRI in pediatric applications[J]. Journal of Magnetic Resonance Imaging,2020,51(6).

  [2]Ju An Park,Hwa‐Rim Lee,Seung‐Yeol Park,Sungjune Jung. Self‐Organization of Fibroblast‐Laden 3D Collagen Microstructures from Inkjet‐Printed Cell Patterns[J]. Advanced Biosystems,2020,4(5).

  [3]Dipesh K. Mishra,Pulak M. Pandey. Experimental investigation into the fabrication of green body developed by micro‐extrusion‐based 3D printing process[J]. Polymer Composites,2020,41(5).

  [4]Ju An Park,Hwa‐Rim Lee,Seung‐Yeol Park,Sungjune Jung. Cell Micropatterning: Self‐Organization of Fibroblast‐Laden 3D Collagen Microstructures from Inkjet‐Printed Cell Patterns (Adv. Biosys. 5/2020)[J]. Advanced Biosystems,2020,4(5).

  [5]Thomas G. Molley,Xiaochun Wang,Tzong‐tyng Hung,Pavithra B. Jayathilaka,Jia‐Lin Yang,Kristopher A. Kilian. Geometrically Structured Microtumors in 3D Hydrogel Matrices[J]. Advanced Biosystems,2020,4(5).

  [6]Rawan Allouzi,Wael Al-Azhari,Rabab Allouzi,Oronzio Manca. Conventional Construction and 3D Printing: A Comparison Study on Material Cost in Jordan[J]. Journal of Engineering,2020,2020.

  [7]Siowwoon Ng,Christian Iffelsberger,Zdenek Sofer,Martin Pumera. Tunable Room‐Temperature Synthesis of ReS<sub>2</sub> Bicatalyst on 3D‐ and 2D‐Printed Electrodes for Photo‐ and Electrochemical Energy Applications[J]. Advanced Functional Materials,2020,30(19).

  [8]Stefanie Lochmann,Yannik Br?uniger,Vincent Gottsmann,Lydia Galle,Julia Grothe,Stefan Kaskel. Switchable Supercapacitors with Transistor‐Like Gating Characteristics (G‐Cap)[J]. Advanced Functional Materials,2020,30(19).

  [9]Rodriguez Castillo Daniel A.,Ansari Jaafar N.,Cooper Robert J.,Lee Garrett J.,Prescott David W.,Sauer Karen L.. Homogeneous Fields: Double Expansion Method, 3D Printing/CNC Realization, and Verification by Atomic Magnetometry[J]. Journal of Magnetic Resonance,2020(prepublish).

  [10]Perepelkina Svetlana,Makhmudova Karina,Kovalenko Pavel. Investigation of Mechanical Properties of Anisotropic Materials Used in Rapid Prototyping Technologies[J]. Materials Science Forum,2020,5940.

  [11]Mukhametzyanov Shamil R.,Safin Ruslan R.,Galyavetdinov Nour R.. Improvement of Composite Filaments for Extrusive 3D Printing[J]. Materials Science Forum,2020,5940.

  [12]Max Ettinger,Henning Windhagen. Individuelle Revisionsendoprothetik am Kniegelenk <trans-title xml:lang="en">Individual revision arthroplasty of the knee joint [J]. Der Orthop?de,2020,49(1 Suppl).</trans-title>

  [13]A. L. Clarke. 3D printed circuit splitter and flow restriction devices for multiple patient lung ventilation using one anaesthesia workstation or ventilator[J]. Anaesthesia,2020,75(6).

  [14]Xu Yangyang,Noirbent Guillaume,Brunel Damien,Liu Feiyang,Gigmes Didier,Sun Ke,Zhang Yijun,Liu Shaohui,Morlet Savary Fabrice,Xiao Pu,Dumur Frédéric,Lalevée Jacques. Ketone derivatives as photoinitiators for both radical and cationic photopolymerizations under visible LED and application in 3D printing[J]. European Polymer Journal,2020,132.

  [15]Hothi Harry,Dall'Ava Lorenzo,Henckel Johann,Di Laura Anna,Iacoviello Francesco,Shearing Paul,Hart Alister. Evidence of structural cavities in 3D printed acetabular cups for total hip arthroplasty.[J]. Journal of biomedical materials research. Part B, Applied biomaterials,2020,108(5).

  [16]Kontovourkis Odysseas,Phocas Marios C.,Tryfonos George,Georgiou Christos. Multi-axis 3D printing of material reduced shell structures on a reconfigurable supporting system using topology optimization principles[J]. Procedia Manufacturing,2020,44.

  [17]Cicione Antonio,Kruger Jacques,Walls Richard S.,Van Zijl Gideon. An experimental study of the behavior of 3D printed concrete at elevated temperatures[J]. Fire Safety Journal,2020(prepublish).

  [18]Bodkhe Sampada,Ermanni Paolo. 3D Printing of Multifunctional Materials for Sensing and Actuation: Merging Piezoelectricity with Shape memory[J]. European Polymer Journal,2020(prepublish).

  [19]Assaad Joseph J.,Hamzeh Farook,Hamad Bilal. Qualitative assessment of interfacial bonding in 3D printing concrete exposed to frost attack[J]. Case Studies in Construction Materials,2020.

  [20]Van Le Tu,Ghazlan Abdallah,Ngo Tuan,Nguyen Tuan. Performance of a Bio-mimetic 3D Printed Conch-like Structure under Quasi-Static Loading[J]. Composite Structures,2020(prepublish).

  [21]Daniel A. Farrell,Travis J. Miller,Justin R. Chambers,Vinitha A. Joseph,W. Thomas McClellan. 《3D Printed Hand Surgical Simulator for Resident Training》[J]. Plastic and Reconstructive Surgery,2020.

  [22]Javan Ramin,Schickel Maureen,Zhao Yuanlong,Agbo Terry,Fleming Cullen,Heidari Parisa,Gholipour Taha,Shields Donald C,Koubeissi Mohamad. Using 3D-Printed Mesh-Like Brain Cortex with Deep Structures for Planning Intracranial EEG Electrode Placement.[J]. Journal of digital imaging,2020,33(2).

  [23]Farrell Daniel A,Miller Travis J,Chambers Justin R,Joseph Vinitha A,McClellan W Thomas. "3D Printed Hand Surgical Simulator for Resident Training".[J]. Plastic and reconstructive surgery,2020.

  [24]Hale Luke,Linley Emma,Kalaskar Deepak M. A digital workflow for design and fabrication of bespoke orthoses using 3D scanning and 3D printing, a patient-based case study.[J]. Scientific reports,2020,10(1).

  [25]Dong Jinping,Zhang Yang,Lee Wei-Ning. Walled vessel-mimicking phantom for ultrasound imaging using 3D printing with a water-soluble filament: design principle, fluid-structure interaction (FSI) simulation, and experimental validation.[J]. Physics in medicine and biology,2020,65(8).


  [26]Li Tian,Chang Jiang,Zhu Yufang,Wu Chengtie. 3D Printing of Bioinspired Biomaterials for Tissue Regeneration.[J]. Advanced healthcare materials,2020.

  [27]Tino Rance,Moore Ryan,Antoline Sam,Ravi Prashanth,Wake Nicole,Ionita Ciprian N,Morris Jonathan M,Decker Summer J,Sheikh Adnan,Rybicki Frank J,Chepelev Leonid L. COVID-19 and the role of 3D printing in medicine.[J]. 3D printing in medicine,2020,6(1).

  [28]. From Prototyping to Production: 3D Printing for Space Comes into its Own[J]. Satellite Today,2020.

  [29]. Technology - Digital Technology; Findings on Digital Technology Discussed by Investigators at Soochow University (Digital Technology Combined With 3d Printing To Evaluate the Matching Performance of Ao Clavicular Hook Plates)[J]. Journal of Engineering,2020.

  [30]. Nanotechnology - Nanoindentation; Northwestern Polytechnical University Researchers Detail Findings in Nanoindentation (Effect of sintering temperature in argon atmosphere on microstructure and properties of 3D printed alumina ceramic cores)[J]. Nanotechnology Weekly,2020.

  [31]. Cornell University; Patent Issued for 3D Printing Of Rolled Materials (USPTO 10,618,216)[J]. Journal of Engineering,2020.

  [32]. Engineering; Researchers from Linyi University Report Findings in Engineering (Modeling of Cloud 3d Printing Service Hyper-network In Service-oriented Manufacturing Systems)[J]. Journal of Engineering,2020.

  [33]Rance Tino,Ryan Moore,Sam Antoline,Prashanth Ravi,Nicole Wake,Ciprian N. Ionita,Jonathan M. Morris,Summer J. Decker,Adnan Sheikh,Frank J. Rybicki,Leonid L. Chepelev. COVID-19 and the role of 3D printing in medicine[J]. 3D Printing in Medicine,2020,6(20).

  [34]Luke Hale,Emma Linley,Deepak M. Kalaskar. A digital workflow for design and fabrication of bespoke orthoses using 3D scanning and 3D printing, a patient-based case study[J]. Scientific Reports,2020,10(6228).

  [35]Utku M. Sonmez,Stephen Coyle,Rebecca E. Taylor,Philip R. LeDuc. Polyc文献综述怎么写arbonate Heat Molding for Soft Lithography[J]. Small,2020,16(16).

  [36]Qiulin He,Youguo Liao,Jingwei Zhang,Xudong Yao,Wenyan Zhou,Yi Hong,Hongwei Ouyang. 《All‐in‐One》 Gel System for Whole Procedure of Stem‐Cell Amplification and Tissue Engineering[J]. Small,2020,16(16).

  [37]Qiulin He,Youguo Liao,Jingwei Zhang,Xudong Yao,Wenyan Zhou,Yi Hong,Hongwei Ouyang. Tissue Engineering: 《All‐in‐One》 Gel System for Whole Procedure of Stem‐Cell Amplification and Tissue Engineering (Small 16/2020)[J]. Small,2020,16(16).

  [38]Russell J. Garwood,Julia Behnsen,Andrew T. Ramsey,Harriet K. Haysom,Luke J. Dalby,Samuel K. Quilter,James S. Maclaine,Zhijin Wang,Jonathan P.L. Cox. The functional nasal anatomy of the pike, Esox lucius L.[J]. Comparative Biochemistry and Physiology, Part A,2020,244.

  [39]Roos M E,Claassen J,Booysen G,van den Heever J,Seedat R Y. 3D printed titanium prosthesis reconstruction following subtotal maxillectomy for myoepithelial carcinoma - a case report.[J]. Journal of stomatology, oral and maxillofacial surgery,2020,121(2).

  [40]Caroline Balemans,Stan F.S.P. Looijmans,Giovanna Grosso,Martien A. Hulsen,Patrick D. Anderson. Numerical analysis of the crystallization kinetics in SLS[J]. Additive Manufacturing,2020,33.

  [41]Ke Sun,Corentin Pigot,Hong Chen,Malek Nechab,Didier Gigmes,Fabrice Morlet-Savary,Bernadette Graff,Shaohui Liu,Pu Xiao,Frédéric Dumur,Jacques Lalevée. Free Radical Photopolymerization and 3D Printing Using Newly Developed Dyes: Indane-1,3-Dione and 1H-Cyclopentanaphthalene-1,3-Dione Derivatives as Photoinitiators in Three-Component Systems[J]. Catalysts,2020,10(4)期刊文献级别.

  [42]Jan Sher Akmal,Mika Salmi,Bj?rn Hemming,Linus Teir,Anni Suomalainen,Mika Kortesniemi,Jouni Partanen,Antti Lassila. Cumulative Inaccuracies in Implementation of Additive Manufacturing Through Medical Imaging, 3D Thresholding, and 3D Modeling: A Case Study for an End-Use Implant[J]. Applied Sciences,2020,10(8).

  [43]. Carbon Research; New Carbon Research Findings from Zhejiang University Described (Liquid Crystalline 3d Printing for Superstrong Graphene Microlattices With High Density)[J]. Science Letter,2020.

  [44]. Science - Materials Science; National University of Defense Technology Researchers Describe Recent Advances in Materials Science (Effect of Holding Time During Sintering on Microstructure and Properties of 3D Printed Alumina Ceramics)[J]. Science Letter,2020.

  [45]. Science; Reports Summarize Science Study Results from University of Technology Sydney (3D Printing of Inertial Microfluidic Devices)[J]. Science Letter,2020.

  [46]I.J. Barabás,I. Hartyánszky,K. Heltai,A. Panajotu,B. Merkely. Intraoperative Use of Computer-Aided 3D Printed Exoskeleton Supporting Left Ventricular Assist Device Implantation[J]. Journal of Heart and Lung Transplantation,2020,39(4).

  [47]Yu Claire,Schimelman Jacob,Wang Pengrui,Miller Kathleen L,Ma Xuanyi,You Shangting,Guan Jiaao,Sun Bingjie,Zhu Wei,Chen Shaochen. Photopolymerizable Biomaterials and Light-Based 3D Printing Strategies for Biomedical Applications.[J]. Chemical reviews,2020.

  [48]Diloksumpan Paweena,Bola?os Rafael Vindas,Cokelaere Stefan,Pouran Behdad,de Grauw Janny,van Rijen Mattie,van Weeren René,Levato Riccardo,Malda Jos. Orthotopic Bone Regeneration within 3D Printed Bioceramic Scaffolds with Region-Dependent Porosity Gradients in an Equine Model.[J]. Advanced healthcare materials,2020.

  [49]Tyagi Manav,Spinks Geoffrey M,Jager Edwin W H. 3D Printing Microactuators for Soft Microrobots.[J]. Soft robotics,2020.

  [50]Yang Yan,Wang Xiaoyue,Lin Xiao,Xie Lingxiao,Ivone Ryan,Shen Jie,Yang Gensheng. A tunable extruded 3D printing platform using thermo-sensitive pastes.[J]. International journal of pharmaceutics,2020,583.


  [51]Gao Yi,Li Jiyao,Dong Bo,Zhang Min. Direct composite resin restoration of a class IV fracture by using 3D printing technology: A clinical report.[J]. The Journal of prosthetic dentistry,2020.

  [52]Mohan Denesh,Khairullah Nur Fatin,How Yan Ping,Sajab Mohd Shaiful,Kaco Hatika. 3D Printed Laminated CaCO<sub>3</sub>-Nanocellulose Films as Controlled-Release 5-Fluorouracil.[J]. Polymers,2020,12(4).

  [53]. Bioengineering; A Graphic User Interface (GUI) to build a 3D printed personalized Prosthetic Hand[J]. Computer Technology Journal,2020.

  [54]Mansour Sharafisafa,Luming Shen. Experimental Investigation of Dynamic Fracture Patterns of 3D Printed Rock-like Material Under Impact with Digital Image Correlation[J]. Rock Mechanics and Rock Engineering,2020(prepublish).

  [55]Steven Kim,Hao Wu,Alexa Devega,Mallory Sico,William Fahy,John Misasi,Tarik Dickens,Joseph H. Koo. Development of polyetherimide composites for use as 3D printed thermal protection material[J]. Journal of Materials Science,2020(prepublish).

  [56]Katharine R. Bittner,Juan M. Jiménez,Shelly R. Peyton. Vascularized Biomaterials to Study Cancer Metastasis[J]. Advanced Healthcare Materials,2020,9(8).

  [57]Yacheng Wang,Yuegang Liu,Yize Sun. A hybrid intelligence technique based on the Taguchi method for multi-objective process parameter optimization of the 3D additive screen printing of athletic shoes[J]. Textile Research Journal,2020,90(9-10).

  [58]Yang Yan,Wang Xiaoyue,Lin Xiao,Xie Lingxiao,Ivone Ryan,Shen Jie,Yang Gensheng. A Tunable Extruded 3D Printing Platform using Thermo-Sensitive Pastes[J]. International Journal of Pharmaceutics,2020(prepublish).

  [59]Miller Jacob R.,Singh Gautam K.,Woodard Pamela K.,Eghtesady Pirooz,Anwar Shafkat. 3D Printing for Preoperative Planning and Surgical Simulation of Ventricular Assist Device Implantation in a Failing Systemic Right Ventricle[J]. Journal of Cardiovascular Computed Tomography,2020(prepublish).

  [60]Xiao Lin,Li Guoqiang,Cai Yong,Cui Zehang,Fang Jiahao,Cheng Hui,Zhang Yabin,Duan Tao,Zang Hongbin,Li Shumin,Ni Zhangsong,Hu Yanlei. Programmable 3D Printed Wheat Awn-Like System for High-Performance Fogdrop Collection[J]. Chemical Engineering Journal,2020(prepublish).

  [61]Muhammad Bilal,Masatoshi Sakairi. Fast Fabrication of Localized Porous Alumina Patterns with 3D Printed Microdroplet Cell[J]. Journal of The Electrochemical Society,2020,167(8).

  [62]Hideto Kojima,Bibek Raut,Li-Jiun Chen,Nobuhiro Nagai,Toshiaki Abe,Hirokazu Kaji. A 3D Printed Self-Sustainable Cell-Encapsulation Drug Delivery Device for Periocular Transplant-Based Treatment of Retinal Degenerative Diseases[J]. Micromachines,2020,11(4).

  [63]Benjamin Kromoser,Thomas Pachner. Optiknot 3D—Free-Formed Frameworks out of Wood with Mass Customized Knots Produced by FFF Additive Manufactured Polymers: Experimental Investigations, Design Approach and Construction of a Prototype[J]. Polymers,2020,12(4).

  [64]Peng Liu,Qing Li,Qiaolin Yang,Shihan Zhang,Chunping Lin,Guifeng Zhang,Zhihui Tang. Three-dimensional cell printing of gingival fibroblast/acellular dermal matrix/gelatin??????sodium alginate scaffolds and their biocompatibility evaluation in vitro[J]. RSC Advances,2020,10(27).

  [65]Barazanchi Abdullah,Li Kai Chun,Al-Amleh Basil,Lyons Karl,Waddell J Neil. Adhesion of porcelain to three-dimensionally printed and soft milled cobalt chromium.[J]. Journal of prosthodontic research,2020,64(2).

  [66]Tasaka Akinori,Shimizu Takahiro,Kato Yoshimitsu,Okano Haruna,Ida Yuki,Higuchi Shizuo,Yamashita Shuichiro. Accuracy of removable partial denture framework fabricated by casting with a 3D printed pattern and selective laser sintering.[J]. Journal of prosthodontic research,2020,64(2).

  [67]. 3D printed parts: calling all dentists and technicians.[J]. British dental journal,2020,228(7).

  [68]. Project launched to 3D print ventilator parts and masks.[J]. British dental journal,2020,228(7).

  [69]Blachowicz Tomasz,Ehrmann Andrea. 3D Printed MEMS Technology-Recent Developments and Applications.[J]. Micromachines,2020,11(4).

  [70]Ran Xiao,Xiaobin Feng,Rong Fan,Sijie Chen,Jian Song,Libo Gao,Yang Lu. 3D printing of titanium-coated gradient composite lattices for lightweight mandibular prosthesis[J]. Composites Part B,2020,193.

  [71]Guo-Xiang Zhou,Cheng Li,Zhe Zhao,Yu-Zhao Qi,Zhi-Hua Yang,De-Chang Jia,Jing Zhong,Yu Zhou. 3D printing geopolymer nanocomposites structure: Graphene oxide size effects on a reactive matrix[J]. Carbon,2020,164.

  [72]Eleni Tsintavi,Dimitrios M. Rekkas,Ruggero Bettini. Partial tablet coating by 3D printing[J]. International Journal of Pharmaceutics,2020,581.

  [73]Xiaoxiao Wang,Guotao Peng,Mengmeng Chen,Mei Zhao,Yuan He,Yue Jiang,Xiaozhen Zhang,Yao Qin,Sijie Lin. Reduced graphene oxide composites and its real-life application potential for in-situ crude oil removal[J]. Chemosphere,2020,249.

  [74]Matheus Savi,Marco A.B. Andrade,Maria P.A. Potiens. Commercial filament testing for use in 3D printed phantoms[J]. Radiation Physics and Chemistry,2020,174.

  [75]Kang Geng,Shaofu Li,Y.F. Yang,R.D.K. Misra. 3D printing of Al matrix composites through in situ impregnation of carbon nanotubes on Al powder[J]. Carbon,2020,162.


  [76]Mohamed Zaid,Eugene J. Koay,Nimit Bajaj,Ryan Mathew,Lianchun Xiao,Anshuman Agrawal,Pearl Fernandes,Hannah Burrows,Millicent A. Roach,Christopher T. Wilke,Caroline Chung,Clifton D. Fuller,Jack Phan,G. Brandon Gunn,William H. Morrison,Adam S. Garden,Steven J. Frank,David I. Rosenthal,Michael Andersen,Adegbenga Otun,Mark S. Chambers. A prospective parallel design study testing non-inferiority of customized oral stents made using 3D printing or manually fabricated methods[J]. Oral Oncology,2020,106.

  [77]Christina Karavasili,Angelos Gkaragkounis,Thomas Moschakis,Christos Ritzoulis,Dimitrios G. Fatouros. Pediatric-friendly chocolate-based dosage forms for the oral administration of both hydrophilic and lipophilic drugs fabricated with extrusion-based 3D printing[J]. European Journal of Pharmaceutical Sciences,2020,147.

  [78]Weijie Li,Lin Sang,Xigao Jian,Jinyan Wang. Influence of sanding and plasma treatment on shear bond strength of 3D-printed PEI, PEEK and PEEK/CF[J]. International Journal of Adhesion and Adhesives,2020,100.

  [79]Yuntao Liu,Tingting Tang,Songqi Duan,Zhizhi Qin,Cheng Li,Zhiqing Zhang,Aiping Liu,Dingtao Wu,Hong Chen,Guoquan Han,Bokun Lin,Jialiang He,Wenjuan Wu. Effects of sodium alginate and rice variety on the physicochemical characteristics and 3D printing feasibility of rice paste[J]. LWT,2020,127.

  [80]Guowei Ma,Nazar Muhammad Salman,Li Wang,Fang Wang. A novel additive mortar leveraging internal curing for enhancing interlayer bonding of cementitious composite for 3D printing[J]. Construction and Building Materials,2020,244.

  [81]Azarmidokht Gholamipour-Shirazi,Michael-Alex Kamlow,Ian T. Norton,Tom Mills. How to Formulate for Structure and Texture via Medium of Additive Manufacturing-A Review[J]. Foods,2020,9(4).

  [82]Heung Ho Lam,Tang Zhi Qiang,Shi Xiang Qian,Tong Kai Yu,Li Zheng. Soft Rehabilitation Actuator With Integrated Post-stroke Finger Spasticity Evaluation.[J]. Frontiers in bioengineering and biotechnology,2020,8.

  [83]Wei Can,Solanki Nayan G,Vasoya Jaydip M,Shah Ankita V,Serajuddin Abu T M. Development of 3D Printed Tablets by Fused Deposition Modeling Using Polyvinyl Alcohol as Polymeric Matrix for Rapid Drug Release.[J]. Journal of pharmaceutical sciences,2020,109(4).

  [84]Barthels Fabian,Barthels Ulrich,Schwickert Marvin,Schirmeister Tanja. FINDUS: An Open-Source 3D Printable Liquid-Handling Workstation for Laboratory Automation in Life Sciences.[J]. SLAS technology,2020,25(2).

  [85]Kristensen Mathilde Frost,Leonhardt Dirk,Neland Merethe Louise B?nneland,Schlafer Sebastian. A 3D printed microfluidic flow-cell for microscopy analysis of in situ-grown biofilms.[J]. Journal of microbiological methods,2020,171.

  [86]Doliveux Simon,Jamjoom Faris Z,Nad论文参考文献格式字体ra Meral,Gallucci German O,Hamilton Adam. Fabrication technique for a custom implant emergence profile on 3D printed casts.[J]. The Journal of prosthetic dentistry,2020,123(4).

  [87]van der Stelt Merel,Verhulst Arico C,Vas Nunes Jonathan H,Koroma Throy A R,Nolet Wouter W E,Slump Cornelis H,Grobusch Martin P,Maal Thomas J J,Brouwers Lars. Improving Lives in Three Dimensions: The Feasibility of 3D Printing for Creating Personalized Medical Aids in a Rural Area of Sierra Leone.[J]. The American journal of tropical medicine and hygiene,2020,102(4).

  [88]Farkas Dale,Hindle Michael,Bonasera Serena,Bass Karl,Longest Worth. Development of an Inline Dry Powder Inhaler for Oral or Trans-Nasal Aerosol Administration to Children.[J]. Journal of aerosol medicine and pulmonary drug delivery,2020,33(2).

  [89]Weadock William J,Heisel Curtis J,Kahana Alon,Kim John. Use of 3D Printed Models to Create Molds for Shaping Implants for Surgical Repair of Orbital Fractures.[J]. Academic radiology,2020,27(4).

  [90]Huang Jing,Koutsos Vasileios,Radacsi Norbert. Low-cost FDM 3D-printed modular electrospray/electrospinning setup for biomedical applications.[J]. 3D printing in medicine,2020,6(1).

  [91]. PhotoCentriC Limited; Patent Application Titled "Method Of Automating The Manufacture Of 3D Printed Objects" Published Online (USPTO 20200094469)[J]. Electronics Newsweekly,2020.

  [92]. Materials Research; Studies from Cardiff University Add New Findings in the Area of Materials Research (Development of 3D Printed Networks in Self-Healing Concrete)[J]. Journal of Technology,2020.

  [93]. Materials Research; Researchers from Guru Nanak Development University Report Findings in Materials Research (On flexural and pull out properties of 3D printed PLA based hybrid composite matrix)[J]. Journal of Technology,2020.

  [94]Jing Huang,Vasileios Koutsos,Norb文献是什么ert Radacsi. Low-cost FDM 3D-printed modular electrospray/electrospinning setup for biomedical applications[J]. 3D Printing in Medicine,2020,6(1).

  [95]. 3D printed parts: calling all dentists and technicians[J]. British Dental Journal,2020,228(7).

  [96]. Project launched to 3D print ventilator parts and masks[J]. British Dental Journal,2020,228(7).

  [97]Zoltán Meiszterics,Abdellilah Asserghine,András Kiss,Lívia Nagy,Tamás Zsebe,Géza Nagy. Scanning Electrochemical Microscopy (SECM) Investigation of 3D Printed Parts Produced by CMT Welding Technology[J]. Electroanalysis,2020,32(4).

  [98]John G. Walters,Shakir Ahmed,Irina M. Terrero Rodríguez,Glen D. O'Neil. Trace Analysis of Heavy Metals (Cd, Pb, Hg) Using Native and Modified 3D Printed Graphene/Poly(Lactic Acid) Composite Electrodes[J]. Electroanalysis,2020,32(4).

  [99]Liesbeth Tytgat,Matthias R. Kollert,Lana Van Damme,Hugo Thienpont,Heidi Ottevaere,Georg N. Duda,Sven Geissler,Peter Dubruel,Sandra Van Vlierberghe,Taimoor H. Qazi. Evaluation of 3D Printed Gelatin‐Based Scaffolds with Varying Pore Size for MSC‐Based Adipose Tissue Engineering[J]. Macromolecular Bioscience,2020,20(4).

  [100]Adnan Sheikh,Bruce B. Forster. 《Holding It in Your Hand》: Musculoskeletal Applications of 3D Printing[J]. Canadian Association of Radiologists Journal,2020,71(2).





  3d打印英语论文参考文献   3d打印参考文献  

打赏 微信扫一扫
« 上一篇 2020年05月19日 17:29:23
下一篇 » 2020年05月19日 17:29:26